Curnamona Exploration Update
Released
Released
Announcement PDF
ASX: IVR
ASX ANNOUNCEMENT
10 October 2024
CURNAMONA EXPLORATION UPDATE
Highlights:
•
Enhanced gravity survey resolves 3 distinct copper targets.
•
Induced Polarisation (IP) survey underway over all target areas.
•
Soil sampling undertaken to improve targeting and prospectivity analysis.
•
Preparation for heritage clearance survey in advance of drill testing of targets.
Investigator Resources Limited (ASX: IVR, “Investigator” or the “Company”) is pleased to report
on the recently completed multi-disciplinary exploration program focused on IVR’s tenements in
the Curnamona region of South Australia.
Investigator holds a number of highly prospective tenements in the South Australian Curnamona region, close to the NSW border and Broken Hill and located approximately 5 hours by
road from Adelaide as seen in Figure 1. Historic
gold and copper mining occurred in the district
and is evidenced by a number of old prospecting
pits and mines within the tenement holding.
There has been little sophisticated or systematic
exploration for decades on Investigator’s exploration tenure.
Recent securing a Native Title Mining Agreement (NTMA) with the Wilyakali group, the Traditional Owners of the area surrounding IVR’s
tenements, has allowed a comprehensive exploration program to commence.
Figure 1: Investigator’s South Australian tenements
Page | 1
ASX Release – Investigator
Curnamona Regional Exploration Update
10 October 2024
Commenting on the program, Investigator’s Managing Director, Andrew McIlwain said:
“Investigator have held the Curnamona ground for some time and negotiation over an extended
period has seen us finalise a Native Title Mining Agreement with the Traditional Owners of the area
and paved the way for meaningful exploration to be undertaken.
“Early work including open file data review and on ground reconnaissance has identified that Investigator’s tenements hold prospectivity particularly for copper and gold. Historic workings estimated to date back to the early 1900’s are primarily located in areas of outcrop, with little exploration undertaken over areas of shallow cover.
“Our recent work focus has been on a large 4km x 1km magnetic feature (Treloars) which is associated with low level surface copper anomalism. Data has recently uncovered additional opensource Airborne Electromagnetics with identification of a number of conductive features proximal
to the magnetic anomaly.
“A program of infill gravity over the Treloars target has recently been completed, with subsequent
Induced Polarisation geophysical surveying initiated over a series of targets resolved by the gravity and other geophysical methods. This work will be utilised to refine planning of drilling to assess
the copper and gold potential of three targets upon completion of a heritage clearance survey.
“Investigator geologists have also advanced understanding of a nearby historic prospect (Dalkey)
by reprocessing historic IP surveys from the 1960’s which saw two diamond drillholes drilled in
1970 targeting the IP anomaly under historic workings. Work on this target is advancing with inspection of drill core retained at the State core library revealing that the core was never assayed.
“With a total of 682 gravity stations surveyed, 18-line km of IP surveying underway and 130 additional soil samples submitted for laboratory analysis, we are keen to consolidate the outputs, develop drill targets to allow heritage clearance followed by drilling anticipated for early 2025.
Curnamona Regional Exploration
The Curnamona Project consists of three exploration licences, EL6253 (Olary), EL6345 (Treloars)
and EL5938 (Wiawera) which are located south of the town of Olary and within a few kilometres
of the Barrier Highway which runs from Adelaide to Broken Hill. The project is approximately 5hrs
drive from Adelaide and 1.5hrs drive west of Broken Hill.
Focus on the current program of work revolved around assessment of prospectivity of a large
magnetic body identified in regional magnetic datasets at the Treloars prospect. This magnetic
body has been interpreted by Investigator as a potential granitic intrusive body and a potential
source for mineralising fluids.
Early soil sampling across the magnetic anomaly identified low level copper anomalism which
offered support to the model, and a number of shallow costeans excavated by local landowners
at the Red Sun prospect have evidence of copper oxide minerals on a number of exposed surfaces. No artisanal mining occurred at this location, suggesting the surface expression was small,
however the presence of oxide minerals hints at a deeper source.
Page | 2
ASX Release – Investigator
Curnamona Regional Exploration Update
10 October 2024
Initial magnetic modelling of the main Treloars magnetic anomaly has resolved its interpreted
depth at 800 – 1000m, intruding interpreted Tapley Hill Formation and Sturt Tillites. Recent review
of the magnetic anomaly by Investigator’s consultant geophysicist incorporated a series of 6 Airborne Electro-Magnetic (AEM) survey lines completed by Geoscience Australia (“GA”) in 2010.
Figure 2: Investigator’s targets in the Curnamona. Main Image: Band pass filtered gravity data recently collected by
IVR with new IP traverses shown in pink. Inset: Regional historic RTP 1VD magnetic image showing large magnetic
feature within tenement.
Review of this AEM data identified two conductive zones of interest that were proximal to the main
Treloars magnetic body, warranted as worthy of further investigation prior to drill testing.
A program of work was devised in order to maximise the information available prior to drill testing
these targets.
1. A program of 495 gravity stations focussed around the broader magnetic body and AEM
conductors. This work was recently completed and preliminary imagery is shown in Figure
2, identifying a dense body coincident with the main Treloars magnetic body, and other
more subtle gravity features associated with the AEM conductors that have been named
the Red Sun and Tombstone prospects. An additional 197 gravity stations were recently
added to this program to expand coverage east towards the historic Dalkey prospect, with
this data yet to be interpreted.
Page | 3
ASX Release – Investigator
Curnamona Regional Exploration Update
10 October 2024
2. A total of 130 ultra fine soil samples were taken in a series of traverses across the Treloars,
Red Sun and Tombstone prospects. Traverses across Treloars and Red Sun were a test
of this method to compare against historic methods, whilst two traverses were completed
over the Tombstone prospect and are the first known soil samples taken over this target.
Samples are at the laboratory awaiting analysis, with results anticipated by month end.
3. Following from the gravity surveying, Investigator’s consultant geophysicist assisted in devising a program of Induced Polarisation (IP) geophysical surveying across all three targets. The survey is underway with outputs of this and finalised gravity modelling anticipated by the end of October. The IP survey will provide information on both chargeable
and resistive features in profiles surveyed and, in conjunction with other data will be utilised
to refine final drill targeting.
Figure 3: Geophysical crew laying out the IP survey wires at the Tombstone prospect.
Additional to the above work, several historic IP survey lines were identified in legacy data covering the Dalkey prospect. This IP was completed in the 1960’s, with the historic explorers drilling
two holes to test the IP interpretation in 1970. It appears that these two diamond holes were
designed to test the highest conductivity and chargeability zones, with neither drill hole sampled
or assayed. Fortunately, both drill holes have been identified at the SA drill core library and have
been inspected by Investigator geologists.
Page | 4
ASX Release – Investigator
Curnamona Regional Exploration Update
10 October 2024
Inspection resolved that whilst some contribution to the IP chargeable feature was explained by
the presence of sulphides including pyrite, pyrrhotite and trace disseminated chalcopyrite, the IP
reprocessing indicates that the drillholes failed to fully test the anomaly at the base of Tapley Hill
Formation. Investigator have collected some preliminary XRF data, density and magnetic susceptibility data, and have arranged for some sampling of the holes for select intervals to be submitted for geochemical analysis.
At the same time, the gravity data was extended by a further 197 stations to expand coverage
from the Tombstone prospect eastwards to include the Dalkey prospect. This will allow comparison of gravity and IP data between both prospects and may assist in model development.
Conclusion
All of the techniques employed in the above program are designed to, in a short timeframe, provide significant information to assist in unravelling the regional geology and refinement of targets
that can be drill tested in a relative short period of time once Native Title heritage surveys are
completed.
Investigator have already notified the Traditional Owners of a desire to complete a heritage survey
before year end to enable rapid mobilisation and testing of what are building to be compelling drill
targets with copper and gold discovery potential. Investigator anticipate that reporting of the final
results from this program of work will occur in November.
For and on behalf of the board.
Andrew McIlwain
Managing Director
For more information:
Andrew McIlwain
Peter Taylor
Managing Director
Media & Investor Relations
Investigator Resources Ltd
NWR Communications
+ 61 (0) 8 7325 2222
+ 61 (0) 412 036 231
amcilwain@investres.com.au
peter@nwrcommunications.com.au
About Investigator Resources
Investigator Resources Limited (ASX: IVR) is a metals explorer with a focus on the opportunities for silver-lead, copper-gold and
other metal discoveries. Investors are encouraged to stay up to date with Investigator’s news and announcements by registering
their interest here: https://investres.com.au/enews-updates/
Capital Structure (as at 30 September 2024)
Directors & Management
Page | 5
ASX Release – Investigator
Curnamona Regional Exploration Update
Shares on issue
1,588,879,574
Listed Options
Unlisted Options
10 October 2024
Dr Richard Hillis
Non-Exec. Chair
318,091,182
Mr Andrew McIlwain
Managing Director
28,500,000
Mr Andrew Shearer
Non-Exec. Director
Top 20 shareholders
29.3%
Ms Anita Addorisio
CFO & Company Secretary
Total number of shareholders
5,515
Total number of optionholders
1,304
Competent Person Statement
The information in this announcement relating to exploration results is based on information compiled by
Mr. Jason Murray who is a full-time employee of the company. Mr. Murray is a member of the Australian
Institute of Geoscientists. Mr. Murray has sufficient experience of relevance to the styles of mineralisation
and the types of deposits under consideration, and to the activities undertaken, to qualify as a Competent
Person as defined in the 2012 Edition of the Joint Ore Reserves Committee (JORC) Australasian Code
for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr. Murray consents to the
inclusion in this report of the matters based on information in the form and context in which it appears.
Appendix 1: JORC Code, 2012 Edition – Table 1
The following section is provided to ensure compliance with the JORC (2012) requirements for the reporting of exploration results presented in the “Curnamona Exploration Update” ASX release dated 10 OCT 2024.
Assessment and Reporting Criteria Table Mineral Resource – JORC 2012
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria and JORC Code explanation
Commentary
Sampling techniques
Gravity
•
•
Nature and quality of sampling
(e.g. cut channels, random chips,
or specific specialised industry
standard measurement tools appropriate to the minerals under investigation, such as down hole
gamma sondes, or handheld XRF
instruments, etc). These examples
should not be taken as limiting the
broad meaning of sampling.
Include reference to measures
taken to ensure sample representivity and the appropriate calibration of any measurement tools
or systems used.
•
Aspects of the determination of
mineralisation that are Material to
the Public Report.
•
In cases where ‘industry standard’
work has been done this would be
relatively simple (e.g. ‘RC drilling
•
•
•
•
•
•
•
Gravity surveying was undertaken by Daishsat Ltd, a specialist gravity survey company using industry standard techniques.
Gravity surveying was conducted on north-south oriented grid with
stations collected at 500m and 125m spacing. A total of 472 stations
were surveyed with a further 23 (4.9%) gravity repeat stations measured for a total of 495 stations.
An additional 197 stations were collected but are not presented in the
accompanying imagery.
Gravity survey measurement were conducted using calibrated Scintrex CG-5 Autograv gravity meters with location provided by Leica
GX1230 GNSS receivers for easting and northing, and reference to
Australian Height Datum (AHD) for elevations.
Regular repeat gravity station measurement was undertaken, as well
as use of a static single gravity base station to calculate absolute and
static drift of gravity over the survey period.
No new drilling or geochemical results are being reported.
No data used to determine mineralisation material to the report.
Page | 6
ASX Release – Investigator
Criteria and JORC Code explanation
was used to obtain 1 m samples
from which 3 kg was pulverised to
produce a 30 g charge for fire assay’). In other cases more explanation may be required, such as
where there is coarse gold that
has inherent sampling problems.
Unusual commodities or mineralisation types (e.g. submarine nodules) may warrant disclosure of
detailed information.
Drilling techniques
Curnamona Regional Exploration Update
10 October 2024
Commentary
•
Not applicable – geophysical survey data only.
•
Not applicable – geophysical survey results only discussed in this release.
•
Not applicable – geophysical survey results only discussed in this release.
•
Not applicable – geophysical survey results only discussed in this release.
•
Drill type (e.g. core, RC, open-hole
hammer, rotary air blast, auger,
Bangka, sonic, etc) and details
(e.g. core diameter, triple or standard tube, depth of diamond tails,
face-sampling bit or other type,
whether core is oriented and if so,
by what method, etc).
Drill sample recovery
Method of recording and assessing
core and chip sample recoveries and
results assessed.
Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
Whether a relationship exists between sample recovery and grade
and whether sample bias may have
occurred due to preferential loss/gain
of fine/coarse material.
Logging
•
Whether core and chip samples
have been geologically and geotechnically logged to a level of
detail to support appropriate Mineral Resource estimation, mining
studies and metallurgical studies.
•
Whether logging is qualitative or
quantitative in nature. Core (or
costean, channel, etc) photography.
•
The total length and percentage of
the relevant intersections logged.
Sub-sampling techniques and sample
preparation
•
If core, whether cut or sawn and
whether quarter, half or all core
taken.
Page | 7
ASX Release – Investigator
Criteria and JORC Code explanation
Curnamona Regional Exploration Update
10 October 2024
Commentary
If non-core, whether riffled, tube
sampled, rotary split, etc and
whether sampled wet or dry.
For all sample types, the nature,
quality and appropriateness of the
sample preparation technique.
Quality control procedures
adopted for all sub-sampling
stages to maximise representivity
of samples.
•
Measures taken to ensure that the
sampling is representative of the
in situ material collected, including for instance results for field
duplicate/second-half sampling.
•
Whether sample sizes are appropriate to the grain size of the material being sampled.
Quality of assay data and laboratory
tests
•
•
•
The nature, quality and appropriateness of the assaying and laboratory procedures used and
whether the technique is considered partial or total.
For geophysical tools, spectrometers, handheld XRF instruments,
etc, the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc.
Nature of quality control procedures adopted (e.g. standards,
blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (i.e.
lack of bias) and precision have
been established.
Gravity
•
•
•
•
•
•
•
•
•
•
Verification of sampling and assaying
•
Scintrex CG-5 Autograv gravity meters were used for field acquisition.
For each gravity observation the CG-5 gravity meter was levelled, restricting the vertical and horizontal levels to 5 arc seconds.
Two gravity observations of 20-second stacking time were read and
recorded at each location.
The instrument was monitored for any seismic or instrumental noise
and the X/Y tilts, temperature and tolerance between readings monitored during the reading time.
The tolerance between readings was set at 0.030 of a dial reading
and any readings falling outside of this were re-read.
Field readings were manually recorded by the field crews in Daishsat
gravity field books along with any observations that may affect the
reading.
During the day the field crews monitored any internal repeat gravity
stations collected for abnormal drift as well as the drift closure at the
end of the day.
A base station reading was taken in the morning before surveying
commenced, and after the last field observation of the day. When
taking a base station reading, the observed gravity values were
stacked over 120 seconds to ensure accuracy. Observations were
repeated until the readings repeated to 0.010 of a dial reading or
less.
Data was downloaded on a daily basis and quality control checked
for repeatability of positional and observational data.
Once data was downloaded, Daishsat’s in-house software was used
to average the two 20-second readings for each gravity station, remove the Scintrex Earth Tide Correction and assign each gravity positional data from the processed GNSS data (matched by
timestamp). Geosoft GRAVRED software was then used to perform
gravity reductions to produce a set of observed gravity values that
can be used for gridding, imaging, and further analysis.
Gravity data was verified and further processed by geophysical consultancy, Montana G.I.S.
Page | 8
ASX Release – Investigator
Curnamona Regional Exploration Update
Criteria and JORC Code explanation
Commentary
•
•
The verification of significant intersections by either independent
or alternative company personnel.
• The use of twinned holes.
• Documentation of primary data,
data entry procedures, data verification, data storage (physical and
electronic) protocols.
•
10 October 2024
Data was QC checked, terrain corrected and processed utilising a
series of industry accepted algorithms to produce a series of gravity
images including Bouguer, Total Bouguer (includes terrain correction), 1VD. Smoothing and trend removal algorithms were utilised to
create residual gravity images.
No assay data is referred to in this release.
•
Discuss any adjustment to assay
data.
Location of data points
•
Accuracy and quality of surveys
used to locate drill holes (collar
and down-hole surveys), trenches,
mine workings and other locations used in Mineral Resource
estimation.
•
Specification of the grid system
used.
•
Quality and adequacy of topographic control.
•
•
•
•
•
Data spacing and distribution
•
•
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is sufficient to establish
the degree of geological and
grade continuity appropriate for
the Mineral Resource and Ore Reserve estimation procedure(s) and
classifications applied.
•
•
•
Set out of the gravity survey grid was done concurrently with gravity
data acquisition using Leica GX1230 GNSS receivers operating in
autonomous mode. Each individual crew had this ‘roving’ receiver
mounted on a vehicle.
Raw kinematic GNSS data was logged by the roving receiver(s) at 5
second intervals during acquisition to determine the precise location
of the GNSS antenna. Repeat stations were strategically placed
throughout the survey to monitor and control positional accuracy.
Where possible, the readings were taken as close as possible to the
nominated coordinates. Some stations were moved from their nominated coordinates for various reasons including inaccessible (trees
and scrub), topographical features that could introduce severe local
gravity terrain effects and other topographical issues making access
to the station difficult or unsafe.
Raw GNSS data was processed using Waypoint’s (Novatel) GrafNav
GNSS post-processing software to produce positions accurate to
within a couple centimetres for the roving antenna location at each
five second interval (epoch). This technique is known as Post Process Kinematic (PPK).
The GDA94 datum and MGA Zone 54 projection system was used
for all data
Gravity is spaced (500m x 500m, infilled to 125m x 125m over anomaly of interest) to allow resolution of geological targets across the survey area.
No information from this geophysical survey is used to establish geological or grade continuity assumptions.
No sample compositing as geophysical technique only.
•
Whether sample compositing has
been applied.
Orientation of data in relation to geological structure
•
Whether the orientation of sampling achieves unbiased sampling
of possible structures and the extent to which this is known, considering the deposit type.
•
If the relationship between the
drilling orientation and the orientation of key mineralised struc-
•
Gravity data oriented to allow merge with existing surrounding surveys and is regarded as a best fit orientation for the survey coverage
and for dominant structural and lithological controls known in the region.
Page | 9
ASX Release – Investigator
Criteria and JORC Code explanation
tures is considered to have introduced a sampling bias, this
should be assessed and reported
if material.
Sample security
•
The measures taken to ensure
sample security.
Audits or reviews
•
Curnamona Regional Exploration Update
10 October 2024
Commentary
•
•
Gravity survey only. No sampling undertaken.
Geophysical data security via cloud hosted and redundancy backed
up datasets.
•
Gravity data was audited by Montana G.I.S Geophysics and confirmed to be acceptable.
The results of any audits or reviews of sampling techniques and
data.
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria and JORC Code explanation
Commentary
Mineral tenement and land tenure status
•
•
•
Type, reference name/number, location and ownership including
agreements or material issues
with third parties such as joint
ventures, partnerships, overriding
royalties, native title interests, historical sites, wilderness or national park and environmental settings.
• The security of the tenure held at
the time of reporting along with
any known impediments to obtaining a licence to operate in the
area.
Exploration done by other parties
•
Acknowledgment and appraisal of
exploration by other parties.
•
•
•
•
•
•
•
•
Exploration was within the Wiawera EL 5938, Treloars EL 6345 and
Olary EL 6253 tenements, granted to Gawler Resource Pty Ltd, a
wholly owned subsidiary of Investigator Resources Ltd.
Investigator manages EL’s 5938, 6345 and 6253 holding 100% interest.
EL’s 5938, 6345 and 6253 are located on Crown Land covered by
several pastoral leases.
Investigator have a stakeholder engagement policy and systems to
ensure compliance with consultation and relevant notices of work.
An NTMA has been signed between Gawler Resources and the
Wilyakali Native Title Group to allow for exploration activities in accordance with the agreement.
There are no registered Conservation or National Parks on EL 5938,
EL 6345, or EL 6253.
There has been limited exploration work undertaken by other parties
at the exploration prospects covered by the gravity survey forming
this program of work.
A Dipole-Dipole IP survey was undertaken by Electro-winning Pty
Ltd in the 1960’s over the Dalkey prospect. McPhar Geophysics was
contracted to carry out the IP survey. A conductive feature was identified and later drill-tested with disseminated pyrrhotite determined to
be the cause of the anomaly.
Airborne Electromagnetic (AEM) data was collected in 2010 by Geoscience Australia (GA) as part of the Frome AEM survey. The survey
was designed to deliver reliable precompetitive AEM data to aid in
research of energy and mineral resources In the Lake Frome region
of South Australia. The survey was flown by Fugro Airborne Surveys
(FAS) for GA using the TEMPESTTM time-domain electromagnetic
(TEM) system. Survey lines were flown east-west at a nominal 100m
above ground level and spaced 2.5km or 5km apart.
The Total Magnetic Intensity (TMI) SA_TMI grid was utilised for target generation. This grid was produced by merging open file aeromagnetic surveys within South Australia at 80m cell size using Intrepid Software by Intrepid Geophysics. A series of products were
derived, including the VRTP 1VD image shown in figure 2 of this release
Page | 10
ASX Release – Investigator
Criteria and JORC Code explanation
Curnamona Regional Exploration Update
Commentary
•
Geology
•
•
•
A series of shallow auger holes were drilled in the region by Climax
Mining Ltd in the 1990’s. Calcrete samples were collected from these
holes and geochemically assayed by ALS.
The prospect area is hosted within the Neoproterozoic age sediments of the Adelaide Rift Complex. These rocks were later deformed during the Delamerian Orogeny, which generated regionalscale folding and faulting of the sedimentary sequences. Intrusive
magmatic units were emplaced during this period, providing potential
for porphyry and epithermal style mineralisation in the region. Examples of this style of mineralisation include the Anabama Hill and Netley Hill prospects.
Sedimentary copper mineralisation potential is present at the base of
the Tapley Hill Formation
No new drillhole information related to this release.
No material information relating to this program is excluded.
•
No results reported.
•
No results reported.
•
Deposit type, geological setting
and style of mineralisation.
•
Drill hole Information
•
10 October 2024
A summary of all information material to the understanding of the
exploration results including a
tabulation of the following information for all Material drill holes:
o easting and northing of the
drill hole collar
o elevation or RL (Reduced Level
– elevation above sea level in
metres) of the drill hole collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
•
If the exclusion of this information
is justified on the basis that the information is not Material and this
exclusion does not detract from
the understanding of the report,
the Competent Person should
clearly explain why this is the
case.
Data aggregation methods
•
In reporting Exploration Results,
weighting averaging techniques,
maximum and/or minimum grade
truncations (e.g. cutting of high
grades) and cut-off grades are
usually Material and should be
stated.
• Where aggregate intercepts incorporate short lengths of high grade
results and longer lengths of low
grade results, the procedure used
for such aggregation should be
stated and some typical examples
of such aggregations should be
shown in detail.
• The assumptions used for any reporting of metal equivalent values
should be clearly stated.
Relationship between mineralisation
Page | 11
ASX Release – Investigator
Criteria and JORC Code explanation
Curnamona Regional Exploration Update
10 October 2024
Commentary
widths and intercept lengths
•
These relationships are particularly important in the reporting of
Exploration Results.
• If the geometry of the mineralisation with respect to the drill hole
angle is known, its nature should
be reported.
• If it is not known and only the
down hole lengths are reported,
there should be a clear statement
to this effect (e.g. ‘down hole
length, true width not known’).
Diagrams
•
Appropriate maps and sections
(with scales) and tabulations of intercepts should be included for
any significant discovery being reported These should include, but
not be limited to a plan view of
drill hole collar locations and appropriate sectional views.
Balanced reporting
•
•
See attached plans showing gravity coverage of the area.
No data from this release allows cross sections to be developed at
this time.
•
No results reported.
•
•
Dipole-Dipole IP surveying has been completed in the past and was
utilised for interpretation where applicable.
Historic drilling and geochemistry studies have confirmed prospectivity and presence of hydrothermal mineral systems in the region.
•
•
Heritage clearance surveying in advance of drilling.
Drill testing of targets generated from gravity survey.
•
Where comprehensive reporting
of all Exploration Results is not
practicable, representative reporting of both low and high grades
and/or widths should be practiced
to avoid misleading reporting of
Exploration Results.
Other substantive exploration data
• Other exploration data, if meaningful and material, should be reported including (but not limited
to): geological observations; geophysical survey results; geochemical survey results; bulk samples
– size and method of treatment;
metallurgical test results; bulk
density
Share your feedback
Discover